Installation Guide
1. Locate an avilable PCI slot.
2. Insert the BLITZTORM System Slot
Cooler into the PCI slot.
3. Screw the BLITZTORM System Slot
Cooler in place.
4. Rotate or tilt the fan to the desired
position.
5. Connect the power cable to any 4-pin
connector from the power supply.
6 .Red-LED is on.
7. Use the BLITZTORM System Slot Cooler
knob to adjust the speed of the fan.
Copyright © 2005 AzenX. All rights reserved.
Product Flyer
Installation Guide
